Copying a file, Sample autorun configuration file, Start options – Honeywell 9900 User Manual
Page 72: Start options -4
4 - 4
Dolphin® Power Tools User’s Guide
6.
Save the file and transport it to the terminal.
Copying a File
If you want to copy a file and move it to another location, use AutoInstall and the
/copy
command line
argument. For details, see
Sample Autorun Configuration File
A sample Autorun.exm file installs on the workstation to
C:\Program Files\Honeywell\Power
Tools and Demos for WM 6.0\EZConfig EXM Files
.
For more information, see
Start Options
Start Options define the required system parameters for a software application to launch. The following
values can be entered for the StartOption key, wherever it appears:
Option Name
The program launches if …
Category
DISABLED
Never, regardless of other startup options specified.
None
COLDBOOT
The terminal has performed a cold boot.
Boot type
WARMBOOT
The terminal has performed a warm boot.
TOUCH
The terminal has a touch screen display installed.
Touch Screen
NONTOUCH
The terminal doesn’t have a touch screen display installed.
BATCH
The terminal is a batch unit (no RF or internal modem cards installed).
Mobility
RF
The terminal has an RF card installed (e.g., Cisco 802.11b).
GSM
The terminal has a GSM radio.
BT
The terminal has a Bluetooth radio.
MODEM
The terminal has an internal modem card installed.
IMAGER
The terminal has an imager installed.
Scanner
LASER
The terminal has a laser scanner installed.
BLIND
The terminal has no laser or imager installed.
ANYSCAN
The terminal has either an imager or a laser scanner installed.