Husqvarna 240e - Manual (Page 22)

TECHNICAL DATA
22 – English
5451676-47 Rev. 4 2008-08-08
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for noise
pressure levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max.
speed.
Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
235e 240e
Engine
Cylinder displacement, cm 3 34 38
Stroke, mm 32 32
Idle speed, rpm 3000 3000
Power, kW (Europe) 1,3 / 9000 1,5 / 9000
Power, kW (Australia) 1,3 / 9000 1,5 / 9000
Ignition system
Manufacturer of ignition system IIDA IIDA
Type of ignition system CD CD
Spark plug Champion RCJ 7Y Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor Zama Zama
Carburettor type W-33 W-33
Fuel tank capacity, litre 0,3 0,3
Oil pump capacity at 8,500 rpm, ml/min 7 7
Oil tank capacity, litre 0,20 0,20
Type of oil pump Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 4,6 4,7
Noise emissions (see note 1)
Sound power level, measured dB(A) 112 113
Sound power level, guaranteed L
WA
dB(A) 118 118
Sound levels (see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A) (Europe)
98,6 100,7
Equivalent sound pressure level at operator’s ear, measured
according to NSW 2000,, dB(A) (Australia)
78 79
Vibration levels (see note 3)
Front handle, m/s 2 2,4 2,1
Rear handle, m/s 2 3,9 2,7
Chain/bar
Standard bar length, inch/cm 16/40 16/40
Recommended bar lengths, inch/cm 13-15 / 33-38 13-15 / 33-38
Usable cutting length, inch/cm 15,5/39 15,5/39
Pitch, inch/mm 0,325/8,3 0,325/8,3
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3
Type of drive sprocket/number of teeth 7 7
Chain speed at max. power, m/sec 20,0 20,0