Quickspecs – HP ProLiant DL120 User Manual

Page 2

Single-Core Intel® Celeron® 440 processor
Single-Core Intel® Celeron® 420 processor
Intel® 3200 Chipset with up to 1333MHz Front Side Bus (FSB)

Memory

Memory:

Supports up to 8 GB of PC2-6400 (800 MHz) Unbuffered DDR2 ECC SDRAM Memory
4 DIMM sockets

Storage Controller

Storage Controller:

Embedded SATA Controller with RAID 0/1 support

Internal Drive Support

Internal Drive Support:

Two 3.5" (Large Form Factor) SATA or SAS hard drives

SAS drives require optional SAS Host Bus Adapter (HBA) or Smart Array Controller

Internal storage capacity of up to 1.5TB (2 x 750GB SATA hard drives)
Optional DVD-ROM or DVD-RW optical drive

Network Controller

Network Controller:

Embedded NC105i Gigabit Server Adapter

Expansion Slots

Expansion Slots:

Two total slots:

(1) Full length PCI Express x8 slot (x8 connector)
Can be replaced with a full-length 64-bit /133MHz PCI-X slot
(1) Half-length, low-profile PCI Express x4 slot (x8 connector)

USB 2.0 Ports

USB 2.0 Ports:

Up to 5 Total: (2) front; (1) internal; (2) rear accessible ports
Internal USB port (optional) for flexible storage, security, or USB drive key deployment

Management

Management:

Standard Lights Out 100 IPMI 2.0 reporting
DL120G5 HP Lights Out 100c Remote Management Card (Optional)
Front Panel status LEDs including system health and UID

Form Factor

Form Factor:

1U (1.69" / 4.30 cm) Rack Mount Chassis
27.5" (69.85 cm) Deep
New fixed mounting rails included with all models

Warranty

Warranty:

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives
have a one-year warranty.

NOTE:

NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.
Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support is available at:

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.htm

Additional information regarding worldwide limited warranty and technical support is available at:

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

QuickSpecs

HP ProLiant DL120 Generation 5 (G5)

Overview

DA - 13014 North America — Version 6 — August 11, 2008

Page 2