Humax PVR-8100T - Manual (Page 63)

**
10.4 Antenna Power
This is used when you connect an active antenna to the ANTENNA IN connector on the rear of the
receiver.
1. Press the MENU button.
2. Select Installation using the button, and press the
or OK button.
3. Select Antenna Power from Installation menu using the
button.
4. Press the or OK button to select On or OFF.
**
On 5V power supply from the active antenna cable.
Off No power supply.
**
Note: The default value is “Off”.
**
10. Installation
GB 62
**
**
**
**
**
**
**
**
**
**
**
**
**
**