Humax PVR-8100T - Manual (Page 35)

**
4. Locking a Recorded programme
1. Select Lock in the edit screen, and then press the OK or button to change Enable or
Disable.
2. You have to enter a password to change the status from Enable to Disable.
Note: If the Lock option of a programme is configured to Enable, you have to enter a password to
playback the programme.
6.5 Checking Hard Disk Drive
You can check the free space of the hard disk drive, and can format the disk drive if necessary.
1. Press the MENU button.
2. Select Record using the button, and press the OK
or button.
3. Select HDD Control using the button, and press the
OK or button.
4. You can check the used and free space of the HDD.
5. Select Format and press the OK button to remove
all the recorded programmes saved on the HDD, and
initialise the HDD.
6. Select Yes for the format confirm message, and enter a
password to start formatting the HDD.
**
Note:
• You have to be careful because performing format deletes all the recorded programmes saved
on the HDD.
• Even if you have removed the HDD because it is out of order, you can still watch programmes.
**
6. Recording and Playback
GB 34
**
**
**
**
**
**
**
**
**
**
**
**
**
**