Humax PVR-8100T - Manual (Page 28)

**
This product automatically saves the programme on air in the installed hard disk drive temporarily,
this allows the user to manipulate the saved programme using functions such as rewind, fast
forward, replay and pause.
5.1 Time Bar
If you press playback control buttons on the remote controller while watching TV, the Time bar
appears on the bottom of the screen.
**
**
Time bar displays the current operation status, the time difference between the broadcasting point
and watching point, and an amount of temporarily saved programme. Time bar also provides 4
operation buttons on the right side for additional time shift operations.
5.2 Pause
If you press the PAUSE button on the remote controller,
the current programme is paused. If you press the PLAY
or PAUSE
button once again, the programme is resumed
from that point.
Note:
Pause makes the time difference or delay between the broadcasting point and watching point. The
time difference is equal to the paused time period. You can check the time difference in the Time
bar. Other operations such as slow motion and rewind also make the time difference.
Press the STOP button to remove the time difference, and watch the programme on air
presently.
**
5. Time Shifted Recording
GB 27
**
**
**
**
**
**
**
**
**
**
**
**
**
**