Humax PVR-8100T - Manual (Page 20)

**
3.3 Antenna Setting
You can set the antenna power.
Press the OK or button to select On or Off.
On 5V power supply from the active antenna cable.
Off No power supply.
Select Next using the button and press the OK
button to start Automatic Search.
Please wait for finishing the Automatic Search. If you want to stop
the Automatic Search, press the OK
button.
If the Automatic Search is stopped or finished, you must press
Save to save the searched result and go to the next step.
3.4 Time Setting
You can set the current time.
Press the OK or button to display the values for GMT
Offset.
Select the appropriate GMT Offset value using the button
and press the OK button to set the current time. Then
select Next using the button and press the OK
button to finish Installation Wizard.
Note: The default item is Auto. If GMT Offset is Auto, it is
automatically set depending on your country. However, if
the time is NOT set properly, you can change GMT Offset
to fit your local time.
Warning: Press the EXIT button to save the previous input
information and exit the Installation Wizard when
running the Installation wizard.
**
**
GB 19
**
**
**
**
**
**
**
**
**
**
**
**
**
**