Maintenance – Husqvarna 155 User Manual
Page 40
38
– English
MAINTENANCE
Checking the safety system
The machin is equipped with a safety system that
prevents starting or driving under the following
conditions:
Rider 155. The engine should only be possible to
start when the cutting unit is in its raised position
and the hydrostat pedals are in the neutral position.
Rider 155 AWD The engine should only be
possible to start when the cutting unit is in its raised
position and the parking brake is applied.
The driver does not need to be seated in the
driver’s seat.
Start engine
Ignition system
Works
Does not work
Make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
Check that the engine stops if you temporarily move
out off the driver’s seat while the cutting unit is
lowered or the hydrostat pedals are not in the
neutral position.
Rider 155 AWD
Rider 155