Husqvarna 155 - Manual (Page 30)

28
– English
Pro 155 AWD has one control for the front axle and
one control for the rear axle.
Pull the controls to their end positions. Do not use
an intermediate position.
Rear Axle
The control is positioned on the inside of the left
rear wheel.
• Control pulled out, drive system disengaged.
• Control pushed in, drive system engaged.
Front Axle
The control is positioned on the inside of the left
front wheel.
• Rear control (pulled out), drive system disengaged.
• Forward control (pushed in), drive system
engaged.
Release lever
The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
6007-217H
6021-028
6021-
Rider 155 AWD front
Rider 155 AWD rear
OPERATION