Husqvarna 155 - Manual (Page 22)

20
– English
CONTROLS
Cutting unit
Rider 155 and Rider 155 AWD are equipped with a
cutting unit.
Combi - 1030 mm/41"
See ”Maintenance \ Checking the Blades” for
identification of the cutting unit.
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)
Lift lever for the cutting unit
The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades will automatically stop rotating (transport
position).
If the lock button is pressed and the lever is moved
forward the unit will be lowered and the blades will
automatically start rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the
lawn.
6017-214
6004-011H
6004-012H