Husqvarna 155 - Manual (Page 29)

English –
27
OPERATION
Stopping the engine
Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the end position.
STOP START
WARNING!
Never drive the machine on
ground with a slope of more than
10°. Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.
2. Pull back the throttle control and turn the ignition
key to the STOP position.
3. When the Rider is at a standstill, press down the
parking brake and push in the locking button.
6017-247
6007-014H
6007-015
MAX 15 MAX 10
Operating on hills
Read the Safety Instructions “Driving on
Slopes” in the “Safety Instructions”.
• The slowest speed possible should be used
before starting up or down hills.
• Avoid stopping or changing speed on hills.
• If stopping is absolutely necessary engage the
parking brake.
• To restart movement, release the parking brake.
• Make all turns slowly.