HP 100VG-ANYLAN B5426-90001 - Manual (Page 17)

Chapter 1 17
Installation Procedure
2. Shut Down the Operating System and Switch Off the Computer
2. Shut Down the Operating System and
Switch Off the Computer
1. Before installing the HP-PB 100VG-AnyLAN Network Adapter,
ensure that the operating system is shut down. Refer to your
computer system manuals for proper shutdown procedures to avoid
corruption or loss of data.
2. Ensure that power to the host computer is switched off and
disconnected from the source power supply.
WARNING Unless otherwise noted in your computer system manuals,
failure to properly shut down the system and remove power may
create a personnel hazard, or may result in hardware damage or
data corruption.