HP IEEE 1394 - Manual (Page 76)

Editing the HP E8491A Resource Manager Configuration 75 Appendix B
Using iclear The iclear function is used to clear the interface (HP E8491A) or individual
message-based instruments in the VXI mainframe. iclear is executed from
the DOS command prompt (..\siclnt\bin or \sicl95\bin directory) as:
iclear
SICL interface name is the name (vxi) and number listed in the ‘I_O
Config’ SICL Interface Name window. logical address is the
address of the message-based VXI instrument to be cleared.
If a logical address is not specified, the (E8491A) interface is cleared and the
resource manager is started.
Figure B-4. Output of ivxisc (cont’d).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com