HP IEEE 1394 - Manual (Page 15)

14 Interface Installation and Configuration Chapter 2
WARNING Turn off and disconnect the power to your computer and to any
peripheral devices before installing the host adapter.
A. Remove the computer chassis cover to expose the expansion slots and
external access covers.
B. Locate an unused, unobstructed PCI bus expansion slot (Figure 2-2)
that supports bus mastering. (PCI bus slots are usually white or
ivory.) See your computer documentation to determine if the PCI slot
supports bus mastering.
Figure 2-1. Layout of the Adaptec
®
AHA-8940 1394-to-PCI Host Adapter.
Internal IEEE 1394 connector
12 VDC power connector
External
IEEE 1394
connectors
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com