HP 10 User Manual

Page 25

Deployment tasks 25

○

Contents of the sysidcfg file:

system_locale=en_US.UTF-8
name_service=none
network_interface=if {dhcp protocol_ipv6=no}
security_policy=none
terminal=ibm-pc
timezone=US/Central
timeserver=localhost
nfs4_domain=dynamic
root_password=9E417cFYuXjIY
service_profile=limited_net

where if is the network interface to configure, such as bnx0 or bge0. You can also use the
keyword value ‘primary’. In this example, the password for user root is root.

Prepare additional packages using pkgtrans(1):

# mkdir /jumpstart/pkg
# pkgtrans .../CPQary3-x.y-solaris10-i386/CPQary3.pkg \
> /jumpstart/pkg CPQary3
# pkgtrans .../BRCMbnx-x.y.z-solaris10-i386/bnx/BRCMbnx.pkg \
> /jumpstart/pkg BRCMbnx
# pkginfo -d /jumpstart/pkg
system BRCMbnx Broadcom NetXtreme II Gigabit Ethernet Adapter

driver
system CPQary3 Third Generation Array Controllers
#

Validate the configuration using the check script from the Solaris media (or install server):

# cd /jumpstart
# .../Solaris_10/Misc/jumpstart_sample/check
Validating rules...
Validating profile proliant...
The custom JumpStart configuration is ok.
#

The check script creates the rules.ok file, which is required by JumpStart.

If not already performed, share the configuration through NFS for client access:

Verify that the directory is shared:

# share | grep /jumpstart

If the JumpStart directory is not listed, or if it is not shared with anon=0, then:

Add the following line to /etc/dfs/dfstab:
share -F nfs -o ro,anon=0 /jumpstart

Activate the NFS share:
# shareall