Harbor Freight Tools CENTRAL PNEAMATIC 95386 - Manual (Page 8)

Page 8 For technical questions, please call 1-800-444-3353. SKU 95386
SPecIFIcatIonS
Electrical
Requirements
120 V~ / 60 Hz / 2 HP
Amperage
7.4 Running Amps
(Dedicated circuit
recommended)
Air Outlet Size 1/4” -18 NPT
Air Pressure
Auto Shut-Off @ 115 PSI
Restart @ 80 PSI
Air Tank Capacity 8 Gallons
Air Flow Capacity 5 SCFM @ 90 PSI
6 SCFM @ 40 PSI
Oil Type
SAE 30W non-detergent
Air Compressor Oil
(Sold separately)
(SKU 95048)
unPackInG
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
note: There is a protective plastic piece
inserted underneath the Protective
Cover (12) to protect the product
during transit. This plastic piece
must be removed before using the Air
Compressor.
InStructIonS For
PuttInG Into uSe
read the entIre ImPortant
SaFetY InFormatIon
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
to PreVent
SerIouS InjurY
From accIdental
oPeratIon:
Push the Power button “oFF”
and unplug the air
compressor from its electrical
outlet before assembling or
making any adjustments to
the compressor.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.