Harbor Freight Tools CENTRAL PNEAMATIC 95386 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. SKU 95386
current your product will draw. An
undersized cord will cause a drop in
line voltage resulting in loss of power
and overheating. Table A shows
the correct size to use depending
on cord length and nameplate
ampere rating. If in doubt, use the
next heavier gauge. The smaller the
gauge number, the heavier the cord.
Industrial applications must follow 16.
OSHA guidelines.
Maintain labels and nameplates
17.
on the compressor. These carry
important safety information. If
unreadable or missing, contact
Harbor Freight Tools for a
replacement.
This product is not a toy. Keep it out
18.
of reach of children.
Operate unit on level surface. Check
19.
oil level daily and fill to marked level if
needed.
People with pacemakers should
20.
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure.
WARNING: The brass components
21.
of this product contain lead, a
chemical known to the State of
California to cause birth defects (or
other reproductive harm). (California
Health & Safety code § 25249.5, et
seq.)
The warnings, precautions,
22.
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SaVe tHeSe
InStructIonS.
GroundInG
to PreVent
electrIc SHock
and deatH From
Incorrect GroundInG
WIre connectIon:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the power cord plug
provided with the compressor.
never remove the grounding
prong from the plug. do not
use the compressor if the
power cord or plug is
damaged. If damaged, have it
repaired by a service facility
before use. If the plug will not
fit the outlet, have a proper
outlet installed by a qualified
electrician.
110-120 V~ Grounded
compressors: compressors with
three Prong Plugs
In the event of a malfunction or 1.
breakdown, grounding provides a
path of least resistance for electric
current to reduce the risk of electric
shock. This compressor is equipped
with an electric cord having an
equipment-grounding conductor and
a grounding plug. The plug must be