beautypg.com

Mark key – Humminbird 385ci User Manual

Page 70

background image

58

Chart View: The 4-WAY Cursor Control key also pans the charts and

highlights decluttered waypoint icons.

Bird’s Eye View: The 4-WAY Cursor Control key controls the motion of

the eye point.

Snapshot and Recording View: Press the UP or DOWN Cursor keys to

highlight a recording icon, and then press the RIGHT Cursor key to start
recording playback. Press the RIGHT or LEFT Cursor keys to control the
speed of playback.

Circular Flasher View (Ice Fishing Mode: On): Press the UP or DOWN

Cursor keys to move the Depth Cursor. Press the RIGHT or LEFT Cursor
keys to adjust the Zoom Range (see Views: Circular Flasher View).

MARK Key

Press the MARK key while in any view to mark the position of a
waypoint. The MARK key function works if you have the GPS
receiver connected.

Active Cursor: The waypoint will be marked at the cursor location.

Without Active Cursor: The waypoint will be marked at the boat

location.

If Screen Snapshot is active, a waypoint will be created, and a screen

snapshot will also be saved to the optional-purchase SD card (see
Views: Snapshot and Recording View). Navigation is not affected by
the Screen Snapshot feature.

NOTE: If Screen Snapshot is enabled but there is not a GPS receiver connected,
pressing the MARK key will capture the screen image and display an error saying that
a GPS position fix is required to create a waypoint.

NOTE: You must have an optional-purchase SD card installed for the screen snapshot
feature to work.

NOTE: In Freeze Frame or Active Cursor mode, you can also make the cursor
move diagonally by pressing in between two of the arrows on the 4-WAY Cursor
Control key.

Key Functions

This manual is related to the following products: