Humminbird 385ci - Manual (Page 102)

90
Delete Recording
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: Press the RIGHT Cursor key and follow screen
instructions.
Delete Recording allows you to delete a single sonar recording. This menu option
is only available when an optional-purchase SD card is installed, Snapshot and
Recording View is on the screen, and you have selected a recording file.
Delete All Recordings
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: Press the RIGHT Cursor key and follow screen
instructions.
Delete All Recordings allows you to delete all the recordings at once. This menu
option is only available when an optional-purchase SD card is installed and
Snapshot and Recording View is on the screen.
Pings Per Second
(optional-purchase SD Card, Snapshot and
Recording View only)
Settings: 1-10, Auto, Default = Auto
Pings Per Second allows you to specify the ping rate for an active sonar
recording.
NOTE: Pings Per Second is available when an optional-purchase SD card is installed,
Snapshot and Recording View is on the screen, and the control head is actively
recording (not playing back).
Auto is the default setting for Pings Per Second and automatically adjusts the
ping rate for best recording quality. If there is limited memory on your SD card,
you can slow the ping rate by setting the Pings Per Second manually, but the
recording will capture less sonar detail. For maximum performance, keep the
Pings Per Second setting on Auto.
Snapshot & Recording X-Press™ Menu