Video recording, Using motion detection function (video mode) – HP V5020U User Manual
Page 15
15
EN
Video Recording
Four resolution settings are available:
•
Resolution
Full HD (1920 x 1080,30fps)
HD (1280 x 720,60fps)
WVGA (848 x 480, 30fps)
Press
•
Record/OK button (
) to record videos. When a video is recording, an video recorded time
indicator will display on LCD monitor. To stop recording, press Record/OK button (
) again.
Press the Mode button
•
(
) to switch to Playback mode to view the recorded video.
Using Motion Detection Function (Video Mode)
If the motion detection feature is enabled, the camcorder will begin to record video automatically once
•
movement/motion is detected in the field of view. When movement/motion is no longer detected, the
camcorder will stop recording a few seconds later. Follow the steps below to enable this feature.
I
1. n Video mode, press the menu button (
) to display the Settings menu. Use the Tele/Wide
buttons ( /
) to navigate to the [Motion Detection] option.
Press the Record/OK button (
2.
) to enter the submenu and use the Tele/Wide buttons
( /
) to highlight [On].
When this feature enabled, the Motion Detection icon
3.
(
) will appear in the upper right corner of
the LCD.