Henny Penny ISLAND WARMER HMI-105 - Manual (Page 25)

Model HMI-103/105
SECTION 3. PARTS INFORMATION
3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny
Island Warmer.
3-2. GENUINE PARTS Use only genuine Henny Penny parts in your warmer. Using a
part of lesser quality or substitute design may result in damage
to the unit or personal injury.
3-3. WHEN ORDERING Once the parts that you want to order have been found in the
PARTS parts list, write down the following information:
(Sample)
Item Number 3
Part Number 39795
Description Lamp Holder
From the data plate, list the following information:
(Sample)
Product Number HMI105.0
Serial Number 0001
Voltage 120/208
3-4. PRICES Your distributor has a price parts list and will be glad to
inform you of the cost of your parts order.
3-5. DELIVERY Commonly replaced items are stocked by your distributor and
will be sent out when your order is received. Other parts will
be ordered, by your distributor, from Henny Penny Corp.
Normally, these will be sent to your distributor within three
working days.
3-6. WARRANTY All replacement parts (except lamps and fuses) are warranted
for 90 days against manufacturing defects and workmanship.
If damage occurs during shipping, notify the carrier at once so
a claim may be properly fi led. Refer to warranty in the front of
this manual for other rights and limitations.
Recommended replacement parts, stocked by your distributor,
are indicated with
 in the parts lists. Please use care when
ordering recommended parts, because all voltages and varia-
tions are marked. Distributors should order parts based upon
common voltages and equipment sold in their territory.
206 3-1
3-7. RECOMMENDED
SPARE PARTS FOR
DISTRIBUTORS