Henny Penny DCW-2 - Manual (Page 7)

SECTION 2. INSTALLATION
2-1. INTRODUCTION This section provides the installation instructions for the Henny
Penny Heated Display Cabinet.
Installation of this unit should be performed only by a
qualified service technician.
Do not puncture the skin of the unit with drills or
screws as component damage or electrical shock
could result.
2-2. UNPACKING The Henny Penny Heated Display Cabinet has been tested,
inspected, and expertly packed to ensure arrival at its destination
in the best possible condition. The cabinet has been bolted to a
wooden skid. All glass items have been packed in cartons and
taped inside the unit and the doors taped shut. The unit is then
packed inside a triple wall corrugated carton with sufficient
padding to withstand normal shipping treatment.
Any shipping damages should be noted in the presence of the
delivery agent and signed prior to his or her departure.
Step 1
To remove the Henny Penny Heated Display Cabinet from the
carton, you should:
1. Carefully cut banding straps.
3