Henny Penny DCW-2 - Manual (Page 15)

3-5. SHUT-DOWN AND
CLEANUP
1. Turn the radiant heat to OFF
2. Open the doors.
3. Remove all the pans.
4. Remove the grids from the lower level and clean with
soap and water at sink.
Do not use steel wool, other abrasive cleaners or
cleaners/sanitizers containing chlorine, bromine, iodine
or ammonia chemicals, as these will deteriorate the
stainless steel material and shorten the life of the unit.
5. Clean all surfaces with a soft cloth, soap, and water.
6. Clean around electrical controls with a damp cloth.
7. Turn off the lights and power switch.
８. Leave the doors open until ready to use again.
11