Figure 2-6, Default display, Figure 2-7 – Honeywell HREP4 User Manual
Page 29: Control bar, Navigating the default display
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
29
08/10
Figure 2-6
Default Display
Navigating the Default Display
The control bar at the bottom of the screen when the DVR is first turned on. After that, it will
show the current time and date.
Each channel has a title.
The red square and letter 'C' in the top right corner of each channel display indicates that
the channel is in Continuous recording mode.
Control Bar
All menus can be controlled with the Control bar, using either the front panel buttons or a
mouse (not included).
Figure 2-7
Control Bar
Note
This User Guide contains instructions for using the front panel controls for
configuration and operation, unless otherwise specified. Most actions can
also be done using the remote control and a mouse (not included).