Logging on, Figure 2-4, Startup screen – Honeywell HREP4 User Manual
Page 28: Figure 2-5, Log on screen
28
Installation
Figure 2-4
Startup Screen
The DVR startup screen detects and checks the status of the hard drives and the
CDRW/DVD-RW drive.
Logging On
After startup diagnostics are complete, you must log onto the system. The default user
name is ADMIN.
Figure 2-5
Log On Screen
Enter the default password 1234 using the channel selection buttons, then press ENTER.
The DVR begins normal operation and shows the default display of 4, 8, or 16 channels
(depending on your DVR model).