Hoover S3239 - Manual (Page 5)

Furniture Guard is located around cleaner and electronic power noz-
zle.
2. Combination Carpet and Floor Electronic Power Nozzle contains
agitator (brush mechanism) and automatically adjusts to different
carpet heights. The nozzle has both a “NORMAL” and a “DEEP
CLEAN” agitator speed and a panel of four LED indicator lights.
3. Headlight
4. Hose Cord Connection to Cleaner is made by plugging hose cord
into cleaner base at receptacle.
5. Large Wheels provide easier towing; pull cleaner using hose to
guide the cleaner easily over carpet, area rugs, and door sills.
6. Check Bag Indicator lights up when throw away bag should be
checked to determine if changing is required.
7. Cord Rewind Control is foot operated. To unwind cord, pull to
desired length. Step on Cord Rewind Control to automatically re-
wind for storage. Hold plug until cord is rewound.
8. Tool Storage Rack provides tool storage for crevice tool, furniture
nozzle, wall/floor brush and dusting brush. (Removable)
9. Furniture Nozzle
10. Wall/Floor Brush
Dusting Brush
12. Crevice Tool
13. ON-OFF Control is a convenient foot-operated control on top of
cleaner.
14. Two Speed Switch allows for “HI” or “LO” speed
15. Spring Latch locks extension wands.
16. Extension Wands connect to hose and electronic power nozzle or
cleaning tools. Model S3237 use curved wand and straight wand
with cord clips when using electronic power nozzle; use extra set of
wands with cleaning tools.
17. Cover Latch
18. Carrying Handle
19. LED (Light Emitting Diode) Indicator Lights show settings for
“FLOOR” and “CARPET” cleaning, and warnings for “CHECK
BELT” and “POWER GUARD”.
20. Agitator Control Pedal is a foot-operated control to set nozzle for
“CARPET” or hard surface “FLOOR”.