Hoover S3239 - Manual (Page 24)

Lubrication
The motor is equipped with one ball bearing and one roller bearing.
These bearings contain sufficient lubrication for the life of the motor.
The addition of lubricant could cause damage. Therefore, do not add
lubricant to either motor bearing.
The agitator is equipped with two ball bearings that should be lubricated
periodically. This should be done by a Hoover Factory Service Center or
an Authorized Hoover Warranty Service Dealer.
Energy saving tips
1. Replace throw away cleaner bag promptly, before overfilled. Use a
genuine HOOVER bag made for your model cleaner.
2. To maintain effective cleaning, replace agitator brushes, brush roll
and belt when necessary.
3. Turn off cleaner when not in use, such as when moving furniture.
4. Keep your cleaner operating at peak performance level have in-
spection and service performed by a Hoover Factory Service Center or
Authorized Hoover Warranty Service Dealer.
22