Hoover S3239 - Manual (Page 22)

Turn nozzle over and unscrew
the 2 Phillips head screws from
the nozzle base.
The cover attaches at the front of
the nozzle. Place the notched
edge at the front of the cover into
the groove in the nozzle base.
Return nozzle to original position
and lift up back of nozzle cover.
Then remove cover, rotating it
forward and lifting it off.
Push bulb into socket and twist
to remove. Push new bulb into
socket and twist into place.
Maintaining front connection, ro-
tate cover over nozzle base and
pull nozzle cord through opening
in cover.
Turn nozzle over and replace
screws.