beautypg.com

Using your steam system ii, Operating instructions, Ultra-microfiber pads what is an ultra-microfiber – Haan MS-30 User Manual

Page 15: How to use the ultra-microfiber, Pads

background image

Operating Instructions:

(cont)

Fig 9

Fig 8

Never leave the appliance in
one spot on any surface for
any period of time. Always
place your STEAM SYSTEM
II on the Floor Protector/
Resting Mat when stationary
and make sure the STEAM
SYSTEM II is turned off not
in use.

HELPFUL

HAAN

®

HINT:

We recommend placing your
STEAM SYSTEM II on the Floor
Protector/Resting Pad while
the unit heats up. When the
unit is ready, lift it off of the
resting pad and simply place
the Ultra-MicroFiber Pad on the
floor. The ‘hook & loop’ system
quickly attaches the pad to the
base of the unit.

Ultra-MicroFiber Pads
What is an Ultra-MicroFiber?

An Ultra-MicroFiber is a textile fiber that is thinner

than a microfiber. The Ultra-MicroFiber by HAAN

®

Corporation is 5-10 times thinner than common

microfiber providing for a significantly higher thread

count in the same surface area. The thinner and

higher the thread count, the greater the absorption.

The HAAN

®

Ultra-MicroFibers are so thin that more

dirt and dust gets trapped between the fibers, making

your cleaning simpler and less time-consuming.


How to Use the Ultra-MicroFiber

Pads:

1) Please make sure that you always use completely

dry pads and replace them as they become

saturated during use.

2) The Ultra-Microfber Pad is made up of multiple

layers of super absorbent material. (Fig 8) The

outer layer is Ultra-MicroFiber on one side and

a ‘hook & loop’ system on the other side that

attaches easily to the underside of the Steam

Head. Simply place the pad on the floor with the

‘hook & loop’ side up, and lightly press the MS-30

STEAM SYSTEM II down on the pad. (Fig 9)

3) As high temperature steam passes through the pad

to contact the floor to kill germs, molds and mites,

it is natural that the pad gradually absorbs moisture.

After a certain length of time, the pad will repel

water and become damp. When the pad becomes

saturated, turn the unit OFF and wait until the

STEAM SYSTEM II cools down (approximately

five (5) minutes) before removing the pad. Put

your foot on a corner of the pad and lift the

STEAM SYSTEM II off the pad (Fig 10).

Using Your STEAM SYSTEM II

Fig 10

www.haanusa.com 877-HAAN DIRECT / 877-422-6347

pg 13