HP ep7100 Series - Manual (Page 50)

50 User’s Guide
Installing permanently
■ Invalid parameter—command with current value
■ Action command with unnecessary parameter—action command
■ Action command that is unavailable—action command
The following simplified example shows how the projector typically responds to
a request to change the active input source. Note that the three latter notifications
are delayed.
Room controller commands
In the following tables, if the parameter listing for a particular command is
“None,” that command requires no parameter. Some commands are valid only
when the projector is turned on, STAT=1. Some commands are available only
when specific input sources are active.
Request: *RSRC=4
Notification: *RSRC=4 (acknowledges request)
*SRC=0 (projector is attempting to acquire
source 4, and in the interim has no valid
source)
*SRC=4 (source 4 is now active)
*BRT=60 (brightness has been modified for
source 4)
*CSPC=? (color space is not supported for this
input)
Source functions
Command Parameters Description
SRC ? Queries the current active input source:
0=no active source, 3=composite video,
4=S-video, 5=component video, 8=DVI.
RSRC 3,4,5,8,? Attempts to use the specified source as
the active input source, or queries the
last source requested: 3=composite
video, 4=S-video, 5=component video,
8=DVI.
NXT None Switches to the next input source.