HP ep7100 Series - Manual (Page 41)

Adjusting the projector
User’s Guide 41
Sound menu
Setup menu
Help menu
Sound menu
Mute Turns off the projector’s speaker.
Volume Adjusts the loudness of the speakers.
Internal speakers Sets whether the internal speakers are turned on.
Reset sound settings Restores sound settings to their default settings.
Setup menu
Language Selects the language used by the on-screen menu.
Projector position Adjusts the picture to match the orientation of the
projector: upright or upside-down, in front of or behind
the screen. Inverts or reverses the image accordingly.
Timeout for menu Sets how many seconds the on-screen menu waits for
input before it closes.
DVI compatibility Sets the configuration of DVI port. If a computer
connected to the DVI port always projects a
low-resolution image, use VGA only.
Reset lamp hours For a new lamp, resets the hours of use.
Reset all settings Restores all menu settings to factory default settings.
Help
Displays information and status for the projector.
Diagnostics... Show tests for checking the operation of the projector
and the remote control.