HP LASERJET 9000MFC - Manual (Page 75)

7 Maintenance 75
Product cleaning
To clean the paper path
1 Before you begin these steps, turn the product off (button out)
and disconnect all cables.
2 Open the front cover of the product, rotate the green lever
downward to the unlocked position, and remove the print
car tridge.
CAUTION
To prevent damage to the print car tridge, use two hands when
removing it from the product.
Note
If toner gets on your clothes, wipe it off with a dry cloth, and wash
your clothes in cold water. Hot water sets toner into fabric.
3 With a dry, lint-free cloth, wipe any residue from the paper path
area, the registration roller, and the print cartridge cavity.
4 Replace the print car tridge.
1
2
3
4
ENWW