HP 3030 - Manual (Page 25)

Using the device control panel
You can also configure settings at the device control panel. This section describes how to
perform the following tasks:
● Printing a configuration page
● Printing a device control panel menu map
● Restoring the factory-set defaults
● Changing the device control panel display language
● Changing the default media size
● Using the device volume controls
Printing a configuration page
You can see which device settings are currently selected by printing a configuration page.
To print a configuration page
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Reports, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Config report, and then press
MENU
/
ENTER
.
The device exits the menu settings and prints the report.
Printing a device control panel menu map
You can see all of your device control panel menu options by printing a device control panel
menu map.
To print a device control panel menu map
1. On the device control panel, press
MENU
/
ENTER
.
2. Use the < or the > button to select Reports, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Menu structure, and then press
MENU
/
ENTER
.
A menu map prints, showing all of the device control panel menu options.
Restoring the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults. For the
HP LaserJet 3030 all-in-one, it also clears the fax header name and phone number. (See the
fax guide for information about how to add your information to the fax header.) This procedure
clears fax numbers and names that are associated with one-touch keys and speed-dial
codes, and deletes any pages that are stored in the memory. The procedure then
automatically restarts the device.
ENWW Using the device control panel 15