Hitachi VT-FX6407AS User Manual

Page 63

EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM

- 63 -

Note:

If you accidentally enter a nonexistent PlusCode number, the VCR gives you an error message that

disappears from the screen in about 10 seconds.

5 Press the

cursor button to select ONE TIME, DAILY or WEEKLY PROGRAM, and then press

ENTER button.

Note:

Programming does not take effect unless you select one of these options.

6 Press the

cursor button to select tape speed, and then press the

cursor button or TAPE

SPEED to choose recording speed SP (standard play) or EP (extended play).
The screen will display all the details of the program you chose. Check the CH number to make sure it is the right
one.
If not, you need to check your VCR Plus+ channel setup again.
• If you have installed a cable box (see page 23), the cable box output will appear in the CH column.

Review the screen to be sure everything is set as you want, then press the PROGRAM button to

complete your programming or continue with additional programs.