Hitachi VT-FX6407AS - Manual (Page 17)

ADVANCED CABLE HOOKUP -WITH CABLE BOX [F] - 17 -
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
TABLE E
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the
VCR indicator on or off.)
TV VCR CABLE BOX
Select and Watch Channels
using TV
Select Cable Box
Output Channel
Select Channel
to Watch
OFF
(TV mode)
Select and Watch Channels
using VCR
3 or 4 Select Cable Box
Output Channel
Select Channel
to Watch
ON
(VCR mode)
Record and Watch
the Same Channel
3 or 4 Select Cable Box
Output Channel
Select Channel
to Watch
ON
(VCR mode)
Record One Channel
Watch Another
Watch Playback of a Tape 3 or 4 ON
(VCR mode)
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select
the appropriate channel.
• When the power is turned on, press the POWER button to turn it off. Press the PLAY button on front of the
VCR. Pressing the CHANNEL
button alternates between RFCH-03 (channel 3) and RFCH-04 (channel 4) in
the VCR's display. Display the channel which is not used by a commercial channel in your area.
ADVANCED CABLE HOOKUP -WITH CABLE BOX [F]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
YOU CAN'T...
• RECORD ONE CHANNEL AND WATCH ANOTHER
ALL CHANNEL SELECTIONS MUST BE MADE AT THE CABLE BOX.
BE SURE TO CONSULT YOUR CABLE BOX MANUAL FOR THE CABLE BOX OUTPUT CHANNEL.
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).