Hitachi VT-FX6407AS - Manual (Page 20)

SETTING THE CLOCK - 20 -
This screen appears to show that the channel is being set.
The dash " - " puts out lights one by one as shown on the VCR's display.
• The VCR will automatically store channels received in your area.
• It takes about 2 - 3 minutes.
When the auto install is complete, the channel with the lowest number appears in the VCR's display.
Notes
• If you press the POWER button inadvertently before connecting all leads, follow the steps on page 20 for
further tuning function.
• If you press the POWER button during auto install mode, the VCR automatically switches to the STOP
mode.
SETTING THE CLOCK
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Tips
1 You'll need to set the clock when first hooking up your VCR, and any time the power goes out for more than 1
hour. When you first plug in the VCR or after a power outage, the clock display will read "--:--" on the TV display.
To set the clock