Hoshizaki KM-250BWF - Manual (Page 42)

42
11. Removal and Replacement of Fan Motor - Except Water-Cooled
Model
Note: When replacing a fan motor with defective winding, it is recommended that a
new capacitor be installed.
1) Turn off the power supply, and unplug the icemaker.
2) Remove the top, front and left side panels.
3) Remove the screws and the fan shroud.
4) Remove the fan blade.
5) Remove the closed end connectors of the fan motor.
6) Remove the fan motor bracket.
7) Remove the fan motor from the bracket.
8) Install the new fan motor, and replace the removed parts in the reverse order of which
they were removed.
9) Replace the panels in their correct positions.
10) Plug in the icemaker, and turn on the power supply.
12. Removal and Replacement of Water Valve
1) Turn off the power supply, and unplug the icemaker.
2) Close the water supply line shut-off valve.
3) Disconnect the water supply piping.
4) Remove the front panel and the top panel.
5) Disconnect the valve outlet tubing by releasing the clamp.
6) Disconnect the terminals from the water valve.
12) Replace the control box cover and the panels in their correct positions.
13) Plug in the icemaker, and turn on the power supply.