HP 6 - Manual (Page 36)

2 How to Install Accessories In Your PC
Installing Memory
24 English
To install a main memory module:
1 Disconnect the computer’s power supply cord and any connection to
a telecommunications network.
2 Remove the computer’s cover (refer to page 19).
3 Slide the memory module into the slot at 45°, ensuring that the notch
on the memory module faces the drive bay. Pivot the memory
module to a perpendicular position and click into place.
4 If you need to remove a main memory module, release the retaining
clips, pivot the module forward, and pull it out of the socket.
5 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
6 Check the HP Summary Screen to verify the new configuration
(refer to page 44).