Humax IHDR-5050C - Manual (Page 45)

7. Preferences
GB44
User’s Manual
7.7 Other Settings
You can configure other settings such as info display time and OSD transparency.
1. Press the MENU button.
2. Select Preferences using the / button and
press the OK button.
3. Select Other Settings using the / button and
press the OK button.
1. Info Display Time
You can set the automatic display time of the information box when the channel is switched.
1. Select Info Display Time and press the OK button.
2. Select a value between Disable, 1~ 20 seconds and press the OK button.
Note: When set to Disable, the i-plate will not be displayed when you switch the channel.
2. OSD Transparency
You can set the transparency of the On-Screen Display.
1. Select OSD Transparency and press the OK button.
2. Select among Disable, 25, 50 and 75 and press the OK button.
Disable Fully opaque screen
25, 50, 75 The bigger the number, the more transparent the screen.
3. Power Saving in Standby
Power Saving in Standby allows you to reduce the power consumption of product in standby mode.
1. Select Power Saving in Standby.
2. Select On or Off using the OK or / button.
3. When selecting On, the time is not displayed on VFD in standby mode.