Humax IHDR-5050C - Manual (Page 42)

7. Preferences
GB41
User’s Manual
2. TV SCART
You can select the TV SCART output option.
1. Select TV SCART and press the OK button.
2. Select among CVBS, S-Video and RGB and press the OK button.
Note: You can select RGB only when the Component Select switch at the rear is on RGB.
3. VCR SCART
You can select the VCR SCART output option.
1. Select VCR SCART.
2. Select CVBS or S-Video using the OK or / button.
4. Audio Output
You can select the audio output option.
1. Select Audio Output.
2. Select Stereo or Mono using the OK or / button.
5. Audio Priority
You can set Dolby Digital automatically. If you select Dolby, Dolby Digital audio will be output via S/PDIF.
1. Select Audio Priority.
2. Select Dolby or PCM using the OK or / button.
6. Audio Delay
You can adjust the sound difference of audio and video.
Tip: The default password is 0000.
1. Select Audio Delay and press the OK or button.
2. Adjust the sync using the / button.
3. Press the BACK button to complete.
Note: Audio Delay is applied to all channels when once adjusted.