Humax IHDR-5050C - Manual (Page 41)

7. Preferences
GB40
User’s Manual
3. Recording Options
You can set the recording padding time in case the recording starts earlier or ends later than scheduled.
You also can set the instant replay or skip time for the REPLAY or SKIP button.
1. Select Recording Options and press the OK
button.
2. Select Start/End Padding or Instant Replay/Skip
Time and press the OK button.
3. Select the time using the OK or / button.
7.5 A/V Setting
You can configure the audio and video output settings.
1. Press the MENU button.
2. Select Preferences using the / button and
press the OK button.
3. Select A/V Setting using the / button and press
the OK button.
1. Component Selection
You must choose the video output type between YPbPr and RGB.
RGB is for SCART connection only. When RGB is selected, you cannot watch video through Component
Out (YPbPr).
1. Select Component Selection and press the OK button.
2. Select YPbPr or RGB using the OK or / button.