HP CheXpress CX30 - Manual (Page 16)

CheXpress® CX30 User’s Manual_Rev 020309
Cleaning the Scanner
1. Compressed Air – (acquired from a local office supply provider)
2. Cleaning Cards – Consisting of one box of 25 cleaning cards – (#IS0028)
3. Cleaning Kit – Consisting of box of 25 cleaning cards & 6 cleaning swabs – (#130007-03)
In severe environments where ink and dirt build up rapidly, it may be necessary to clean the
scanner rollers and magnetic read head, and document track every six to twelve months.
This simple maintenance will dramatically improve the reliability of your scanner over its
useful life.
Scanner Cleaning Supplies (to order call 847.446.2285)
Cleaning your scanner’s Rollers, Magnetic Head and Camera Faceplates
Cleaning The CheXpress® CX30 using ScanLite Software
Visit the following site to download ScanLite:
http://www.digitalcheck.com/integration_support/drivers_and_demo_programs
Helpful Hints
The ScanLite program, which is available from the Digital Check web site, is an excellent
utility to run while performing the cleaning procedures recommended below. ScanLite
provides an easy way to initiate the scan cycles in order to feed the cleaning cards properly
through the scanner. ScanLite also includes an ‘Eject’ button which operates the scanner at
half its normal speed, making it easy to run the cleaning cards while they are still wet.
1. Do not use stickers to cover up previously sprayed numbers on documents. The
backing from the stickers can rub off onto the rollers and cause documents to
jam.
2. Do not use “White Out” on scanned documents, the “White Out” can rub off the
documents onto the scanner path and walls.
3. Watch for loose debris getting into the scanner such as staples and rubber bands.
4. There are no user available adjustments within the CX30.
5. Periodic and scheduled cleaning should be performed before determining if any
further problem determination is needed.
16