HP 40 SCSI - Manual (Page 27)

Interface Interface Interface Interface DAT 24 DAT 24 DAT 24 DAT 24 DAT 40 DAT 40 DAT 40 DAT 40 DAT 72 DAT 72 DAT 72 DAT 72
SCSI-2 Interface SCSI-2 Interface SCSI-2 Interface SCSI-2 Interface Narrow SCSI-2 single-
ended Wide Ultra SCSI
(LVD/SE) Wide Ultra SCSI
(LVD/SE)
SCSI-3 Interface SCSI-3 Interface SCSI-3 Interface SCSI-3 Interface N/A N/A SCSI-3 Ultra 160 LVD
SCSI Connector SCSI Connector SCSI Connector SCSI Connector Internal: 50-pin LVDS
External: 50-pin narrow
HD LVDS, bail lock
Array module: 80-pin
EBBI
Internal: 68-pin wide HD
LVD
External: 68-pin wide
HDLVD, thumbscrew
Hot-plug: 80-pin SCA-2
(SCSI and power)
Array module: 80-pin
EBBI Internal: 68-pin wide HD
LVD
External: 68-pin wide
LVDS, thumbscrew
Hot-plug: 80-pin SCA-2
(SCSI and power)
Array module: 80-pin
EBBI
USB Interface USB Interface USB Interface USB Interface USB 2.0 USB 2.0 USB 2.0
USB Connector USB Connector USB Connector USB Connector USB standard series B
receptacle USB standard series B
receptacle USB standard series B
receptacle
Termination - is only Termination - is only Termination - is only Termination - is only
required for the SCSI
required for the SCSI required for the SCSI required for the SCSI
product
product product product
No terminator is required for internal model (assumes use of terminated
cable).
External model requires termination with multimode terminator (included with
product).
SCSI Array module requires termination with multimode terminator (ordered
separately - p/n C2364A).
Power Specifications Power Specifications Power Specifications Power Specifications DAT 24 DAT 24 DAT 24 DAT 24 DAT 40 DAT 40 DAT 40 DAT 40 DAT 72 DAT 72 DAT 72 DAT 72
Power Requirements Power Requirements Power Requirements Power Requirements
(SCSI-2 internal, hot-
plug, and array module) +5V ± 5% (100mV Max
ripple) @1.2A
+12V ± 10% (150mV
Max ripple) @0.1A +5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A +5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A
Power Requirements Power Requirements Power Requirements Power Requirements
(USB and SCSI-3
internal, and array
module) +5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A +5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A +5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A
Power Requirements Power Requirements Power Requirements Power Requirements
(external) 100 to 240 VAC, 50-60
Hz, auto-ranging 100 to 240 VAC, 50-60
Hz, auto-ranging 100 to 240 VAC, 50-60
Hz, auto-ranging
Power consumption Power consumption Power consumption Power consumption
(SCSI) (average) 6 Watts 7.3 Watts 7.1 Watts
Power consumption Power consumption Power consumption Power consumption
(USB) (average) 7.1 Watts 7.3 Watts 7.1 Watts
Environmental Environmental Environmental Environmental
Specifications
Specifications Specifications Specifications
(all models)
Relative Humidity Relative Humidity Relative Humidity Relative Humidity Storage Storage Storage Storage 5% to 95%
Operating Operating Operating Operating 20% to 80%
Temperature Range Temperature Range Temperature Range Temperature Range Storage Storage Storage Storage -40° to 158° F/(-40° to 70° C)
Operating Operating Operating Operating 41° to 104° F/(5° to 40° C)
Standards Compliance Standards Compliance Standards Compliance Standards Compliance cCSAus Certification to C22.2, No. 60950, TÜV EN60950 (IEC 60950), FCC and CE Declaration of
Conformity, C-TICK Approved (AS/NZS CISPR22), VCCI Approved, RRL Approved, BSMI Approved,
GOSH Approved
QuickSpecs
HP StorageWorks DAT Drives HP StorageWorks DAT Drives HP StorageWorks DAT Drives HP StorageWorks DAT Drives
Technical Specifications
DA - 11883 Worldwide — Version 15 — March 20, 2006 Page 27