HP 3380 - Manual (Page 92)

Cleaning the outside of the device
To clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the
device.
To clean the glass
Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects
the accuracy of special features, such as fit-to-page and copy. Use the following procedure to
clean the glass.
1. Turn off the device, unplug the power cord from the electrical socket, and then raise the
lid.
2. Clean the glass by using a soft cloth or sponge that has been moistened with nonabrasive
glass cleaner.
CAUTION Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on
any part of the device; these can damage the device. Do not place liquids directly on the
glass. They might seep under it and damage the device.
3. Clean the scanner strip by using a soft cloth or sponge that has been moistened with
nonabrasive glass cleaner.
4. Dry the glass with a chamois or cellulose sponge to prevent spotting.
80 Chapter 7 Cleaning and maintenance ENWW