HP 3380 - Manual (Page 76)

Note To use this feature in Windows, a folder must be set up in the Scan-to... tab prior to use. See
Programming the device Scan-to button .
1. Load the originals that are to be scanned face-up in the automatic document feeder (ADF)
input tray, with the top of the document forward, and adjust the media guides.
OR
Lift the flatbed scanner lid and load the original that is to be scanned face-down on the
flatbed scanner with the top, left corner of the document located in the lower-right corner
of the glass. Gently close the lid.
2. Press
SCAN TO
on the device control panel.
3. Use the < or the > button to select a folder.
4. Press
START SCAN
or
MENU
/
ENTER
. The document is scanned to a file, which is then saved in
the folder that you selected in step 3.
64 Chapter 5 Scanning ENWW