Print quality is unacceptable, Light print or fade, Toner specks – HP 3380 User Manual
Page 121: Light print or fade toner specks
Print quality is unacceptable
This section provides information about identifying and correcting print defects.
Note
Check the power connection. Make sure that the power cord is firmly connected to both the
device and the power supply box. Plug the power cord into a grounded AC power outlet.
Hewlett-Packard does not recommend the use of uninterrupted power supply (UPS) battery-
backup devices or surge suppressors with this device. Many surge suppressors and battery-
backups can cause print defects.
Light print or fade
●
The toner supply is low. See
for more information.
●
The media might not meet Hewlett-Packard media specifications (for example, the media
is too moist or too rough). See
for more information. If the
whole page is light, the print density adjustment is too light or EconoMode might be turned
on. Adjust the print density and turn off EconoMode in the device properties. See
for more information.
Toner specks
●
The media might not meet Hewlett-Packard media specifications (for example, the media
is too moist or too rough). See
for more information.
●
The device might need to be cleaned. See
ENWW
Print quality is unacceptable
109