Hitachi JPEG2000 - Manual (Page 58)

JPEG2000 Stand alone DVR User Guide
- 58 -
[PTZ/SAVE]
1.[Circular Monitoring Interval]
Set up a sequential switch interval.
2.[Scan Rate]
Select a Fast forward (FF) speed of remote Playback.
3.[PTZ Type]
Select the protocol used by your PTZ camera.
4.[PTZ Baudrate]
Select a PTZ camera buad rate.
5.[Set Path to Save Reorded Images]
Set a path to save the video clips. If you do not specify a
path, the program will save all files to its default location,
C:\Program Files\Remote_J2K.
6.[Run in Full Screen Mode]
Check the box to enlarge the Interace to the full
computer screen.
7-4-5 PTZ control
1.[ZOOM]
Use + / - to adjust PTZ Zoom IN/OUT.
2.[FOCUS]
Use + / - to adjust PTZ Fous.
3.[PAN/TILT CONTROL]
Click the direction buttons to control Pan and Tilt.
4.[PTZ ID]
Show the PTZ ID that is under control.
5.[+/-]
Click +/- to select a PTZ ID.