Hitachi JPEG2000 - Manual (Page 48)

JPEG2000 Stand alone DVR User Guide
- 48 -
6-2 PTZ camera operation
Use MENU and NEXT key to select a PTZ command, and [+] [-] to select the
channel. Then, press PTZ key to enter the PTZ control mode.
Indicate the channel connected with a PTZ camera.
Indicate PTZ command, press ENTER to send control code by PTZ key.
You can also press the PTZ button on the front panel, and use the front panel
pre-assigned PTZ function keys to control the PTZ camera.
[Operate by PTZ control keys]
After entering PTZ control mode, PAN/TILT function can be controlled by direction keys and pre-assigned PTZ
function keys. .