beautypg.com

Jpeg2000 stand alone dvr user guide, Chap.7 network and client software, 1 network introduction – Hitachi JPEG2000 User Manual

Page 49: 2 network installation and setup

background image

JPEG2000 Stand alone DVR User Guide

- 49 -

7-1 Network Introduction

Users have to indentify what kind of Internet access they have before they set up the DVR’s network parameters.

DSL and cable modem are the most popular broadband technologies.

ADSL- Asymmetric Digital Subscriber Line

ADSL is one of xDSL technologies, transmitting digital data over the wires of a local telephone network. Typically,

the download speed of DSL ranges from 128 kilobits per second (kbit/s) to 24,000 kbit/s depending on DSL

technology and service level implemented. Upload speed is lower than download speed. ADSL is the most

popular broadband technology, followed by Cable Modem.

Cable Modem(or Cable)

Cable Modem, Cable Internet Acess, or simply Cable is to deliver the Internet Service over a coaxial cable line,

which can be the cable of your Cable TV. The bandwidth of Cable ranges from 3 Mb to 15 Mb, or more. The

upload bandwidth usually ranges from 384kb to 2Mb, or more. However, the connection speed may drop when

many people are using the sevice at the same time

7-2 Network installation and setup

7-2-1 Via Cable

Connect the Network cable of Cable Modem output to DVR

Enter [SYSTEM MENU]

f [EXTERNAL DEVICE] f [TP/IP SETUP]f[DHCP SETUP]f[DHCP MODE].

Place the cursor at DHCP MODE and press ENTER to switch the DHCP MODE to [AUTOMATIC]. Then,

move the cursor over [DETECT IP] and press ENTER to detect IP. DVR will automatically get the IP ADDRESS,

SUBNET MASK, and GATEWAY from the Cable Modem and shows the IP information on the DVR.

Press MENU and go back to the previous setup page, [TP/IP SETUP]. Go to [IP CONFIG SETUP] to set up the

port number. You can either use the default port number or assign a new one.

CHAP.7 Network and client software