Hitachi JPEG2000 - Manual (Page 47)

JPEG2000 Stand alone DVR User Guide
- 47 -
6-1 PTZ camera Installation
6-1-1 Connection Setup
Connect the PTZ’s D+ to the DVR’s D+, and D- to D-.
6-1-2 PTZ setup
[EXTERNAL DEVICE]
SYSTEM MENU ` EXTERNAL DEVICE ` PANTILT SETUP ` COMMAND SETUP
1. [MODEL]: select a PTZ protocol.
2. [PTZ ID]: enter the PTZ’s ID / address.
3. [BAUD RATE]: enter the PTZ’s transmission baud rate
4. [CMD DELAY]: the delay time of the command transmission between bytes. Please refer to the PTZ user manual
for the manufacturer’s suggestion.
CHAP.6 PTZ camera control
Each PTZ manufacturer may have different transmission buad rate. Please refer to the PTZ manuals
for the detail information. Enter the baud rate suggested by the manufacturer in the DVR’s PTZ setup.